Experimenter's 4.5" DIY Tesla Turbine Project 

Back CD Order Form


Complete DIY construction plans (including CAD files) for the 4.5-inch Experimenter's Tesla Turbine

... and MORE!

 

NOW AVAILABLE! 
Tesla Turbine Plans CD

Learn the secrets of Nikola Tesla's 100-year old turbine! - Find out why this really is the Engine of the 21st Century!


All the information you'll need to build an industrial quality Tesla disk turbine using home shop tools!

CD Order Form

baseplate drawing

Oil return coupler

Experimenter's 4.5" Tesla Turbine
Physical size: Approximately 6" x 6" x 10" - 4.5-inch hot rotor/disk pack
Fuel: Compressed air (3-5 hp) or Steam - You may use any reasonable steam pressure and temperatures up to 150 psi and temperatures up to 700 degrees F.
RPM's: Designed to run at 24,000 - 30,000 rpm with a load. Top unloaded speed is 40,000 rpm, but it is not recommended for prolonged unloaded runs.
Horsepower: Fractional. - Since horsepower is a function of gas momentum, disk geometry and nozzle design, it is difficult to specify an exact horsepower rating. A reasonable expectation is about 1/4 horsepower at 150 psi and 6 cfm. Typically, expect 1 hp steam in to produce 1/3 hp out. (If run 24 hours per day, expect 8 kWh of power per day.)

Complete DIY plans (including CAD files) for the 4.5-inch Experimenter's Tesla Turbine... and MORE!

This is the first in a series of Do-It-Yourself projects aimed at transforming the world from centralized utilities to decentralized, independent power. By empowering the "grassroots" individual, we will break the stranglehold of global government/industrialist extortion over the masses, and raise the lowest levels of mankind to a new, sustainable lifestyle.

What's on the CD?

This CD is organized into two distinct parts:

  1. Model images, drawings, and club articles section accessed using your web browser.
  2. 3D model and CAD file section accessed using your Windows Explorer.

Ten different CAD formats included for those with access to CAD/CAM machinery:

bullet.ICS - IronCad
bullet.sat - Acis 6.0
bullet.x_t - Parasolid 12
bullet.stp - STEP AP203
bullet.igs - IGES
bullet.model - CATIA
bullet.3ds - 3D Studio
bullet.dxf - AutoCAD DXF
bullet.obj - Wavefront OBJ
bullet.stl - Stereolithography

There's more!

Complete PTBC articles through April 2006 - PLUS all the information you'll need to build an industrial quality Tesla disk turbine using home shop tools!

Don't miss out on ordering this information-packed CD! 

Order your Tesla Turbine project CD today!

* Contact us for multiple-license pricing if you are a university professor or teacher interested in teaching Tesla Turbine technology in the classroom.

 

Please read our Ordering Policy before printing your Order Form.

Experimenter's 4.5" DIY Tesla Turbine Project CD, PNGinc Experimenter's Tesla Turbines, hot rotors, Tesla turbine plans, drawings, CAD files, CNC, manufacturing, manufacturer, research, Infinity Engine, Nikola Tesla, Tesla boundary layer turbines, Tesla disk turbines, bladeless turbines, Engine of the 21st Century, steam turbines, solar turbo-generator, cogeneration, solar thermal energy, all-fuel engine, recycled waste oil, solvents, renewable fuels, biodiesel, alcohol, heat recovery, combustible, wood, hay, stubble, alternative energy systems, self-sufficiency, emergency preparedness, energy security, off-grid, electrification, renewable power, sun, wind, biomass, research, product development, Ken Rieli, Phoenix Turbine Builders Club

Last updated: February 25, 2008 09:09 PM

Phoenix Turbine Builders Club

FREE Open Source Forum

www.phoenixnavigation.com/ptbc/home.htm