South Amboy, New Jersey -- Mechanical Engineering and Computer/Network Technology background.

Brookings, Oregon -- I'm looking for information on on how the turbine can be used as a hydro electric turbine

Norman, Oklahoma -- Gas Turbine Equipment Specialist. Interested in Steam turbines for a variety of powerplants, both vehicular and stationary.

TelknorDragon_AT_yahoo_DOT_com  
Fort Walton Beach, Florida -- 01/26/07

docanderson_AT_bellsouth_DOT_net 
Dallas, Georgia -- 01/22/07 I am a pharmacy student who loves building things in my shop as a hobby. Up 'til now, my shop time has revolved around working on our project cars for fun. I have always been interested in the idea of solar power and am quite intrigued by the Tesla turbine I have been reading about on this site.

Great Falls, Montana -- http://www.m-l-z.net/  Very big into alternative energy and finding new and old ways of doing things.

Texas - I first built a working model in 1979 based on a magazine article. I have tried several times to improve the design. I built a test stand that would allow me to vary the spaces between the disks while it was spinning. I used air as the working fluid. I used a hollow center shaft. Are you interested in knowing the results of my tests?

Elk Grove, California -- I custom build human powered vehicles.

kpatwood_AT_centerxperts_DOT_net 
Boise, Idaho – 03/06/06

Roslyn Heights, New York – I have been working solid every night and day for a year on Tesla "stuff". Have had success. Made a little cardboard turbine model that worked! wow. I build some coils, shoot lightning about from my fingers, all that stuff...but electrical or turbine powered flight, wireless transmission of power (especially) greening the deserts, providing hydrogen, a new electric grid, are just a part of my research. Boy do I need help. Seeing a psyche...lol. sined -- Toby Circus

Miramar, Florida - crazy car mechanic

Maryesther, Florida -- open to all things

Titusville, Florida -- Highly interested in alternative power sources. Open to most ideas, primarily interested in Tesla Turbine based research.

Tehachapi, CA – www.tehachapinews.com  02/21/07 I am organizing a project to develop High Altitude wind Generation HAWG as an energy X-Prize. We are asking students/teams to send us links to their videos, related to energy development for High Altitude. Check out our energy Blogspace: www.myspace.com/americanwindfarms 

College Place, Washington – I’m a chemist that wants the revolution to happen

Overton, Nevada -- http://itcert.ccsn.net  Interested in electricity generation

Philadelphia, Pennsylvania

Long Island, New York

Wilmington, North Carolina - www.leebell.net  retired gunsmith, home machinist, metal casting, recumbent trikes.....the list goes on

mlbellue_AT_yahoo_DOT_com 
Pomona, California -- 01/15/07 Like many other people, I'm with a group that is working to develop a turbine that will overcome the previous shortcomings of Tesla's Turbine.

Vero Beach, Florida - 04/14/07

Leland, North Carolina -- 23 years experience in product design, Electronic and software skill sets. Have been interested in alternate power generations for over 30 years.

Fort Collins_DOT_com

Tampa, FLorida

Tucson, Arizona -- I am an entrepreneur looking to gain more knowledge about the Tesla turbine

Miami, Florida

West Caldwell, New Jersey -- I am mechanically inclined and enjoy working and fixing machines!

Fort Mohave, Arizona – I am a jeweler with a strong mechanical background. I'm currently interested in the Tesla turbine technology as it applies to boat propulsion.

Tempe, Arizona – I want to learn about the Tesla Turbine and all related to its technical design information. I want to see some of the practical results that the club members achieved. Thanks

Ferndale, WA - I'm interested in all things Tesla, verified or not. I'm also interested in highly efficient to free forms of energy. I believe that nearly everything can be improved.

Temple Hills, Maryland -- work w unusual manufacturing processes, energy processes, inventions, etc, and a US member of ULTRATESLAN Intl. Corp (Canada). Will be building the paper turbine approx 2 times the diameter and using a man. process to convert the paper into carbon fiber nanotubes to exceed the strength/weight of steel 20x. Will apply both Brown's Gas and Joe Cell gas to try to get over 400Hp from a 10" model for cars airplanes copters and motorcycles.

Rochester, Minnesota -- www.osemi.com  Ken, I have had an ongoing interest in solar power and turbines for some time. I can bring some experience in advanced materials from the semiconductor industry to the club at reasonable cost. I am interested also in solid state PV, and my small company has the capability to make the 37% efficient PV wafers that can be combined with a solar concentrator electrolyzer and turbine to form an entire system. Have you looked at the use of dual fuel (hydrogen + waste oil) in your tesla turbine? Adding 5-7% hydrogen could potentially increase the HP of the tesla turbine because shock wave from H combustion is so very fast. I look forward to purchasing a kit and participating... All the Best

Robert Brinkley
bruzer88_AT_hotmail_DOT_com 
Westland, Michigan

Mew London, Connecticut -- preparing to go off grid in 6 months

Fleming, Colorado

Ft Myers, Florida -- We are designing a sustainable system for our new home using parabolic solar steam generators

Bellvue, Colorado -- roguecamp_DOT_com/heliostat  Actually I know little about turbine design but I have designed a very simple solar tracking circuit that is capable of sub-degree accuracy. It can be built for about $20 I am currently using it in my non-computerized heliostats.

Fresno, California -- http://7xme.us  I'm compiling info on sustainable self-sufficiency to make available and propagate.

jburri_AT_midwestis_DOT_net 
Macks Creek, MO -- 02/20/07 http://www.angelfire.com/ak5/jimsworkshop/  I am into alt Energy

Salem, Oregon

Coldwater, Ohio 06/05/04 I am a second class steam engineer that runs a 10 meg. turbine for a city power plant, we burn coal to fire the boilers. I am looking for a small turbine to build to run my home. I have built many boilers and a traction engine, Have my own machine shop with lathe, mill, broach, hyd. press and more. looking forward in starting this project.

Kalamazoo, Michigan -- Nikola Tesla was one of my boyhood idols, and I have always known about the Tesla Coil - it was not until a short while ago that I discovered so much information about him and his work... If I had known of these things back then - so much would be different now. I am very glad to have found you all.

Woburn, Massachusetts -- am interested in health and want to be a natropath in the near future.

Jackson, Mississippi -- I am a motorcycle, atv, watercraft mechanic and have been in the industry for 14 years. I am very interested in combining turbine technology with these vehicles for a more efficient, reliable, cleaner source of power

Hallandale, Florida -- I like to invent things... I am crazy about understanding how things work and then ways to improve them.

Raeford, North Carolina

Thomas Carpenter
ki8as_AT_charter_DOT_net 
Owosso, Michigan -- Interested in alternate power systems for cars and home. Am building a battery powered electric vehicle now.

San Jose, CA -- 05/02/06 Like you, I am passionate about the environment. I grew up in LA in the 60's and had no choice about the horribly polluted air I had to breathe. I chose mechanical engineering because I wanted to develop pollution-free solar power generation...  I have a pretty good idea that a 3kW (photovoltaic) system, installed by myself, would result in an out-of-pocket expense well in excess of $20k. I'm thinking there must be a cheaper way... I'm hoping to get some valuable information from your club...  My plan is to build a working system, one way or the other. And, I don't want to have to learn it all on my own. Mankind needs to learn to leverage off of each others skills and knowledge. That accelerates development. Reinventing the wheel is a waste of time.

Washington, District of Columbia -- Although I graduated from Electronics & communications Engineering interested in hydrogen powered rotary engines and now Tesla disk turbines power generation and power plant for wing in ground effect vehicle/model. As building engineer for 4 buildings trying to cut down cost of electricity and gas.

Pearl, Illinois -- I am really interested in any new technologies, especially ones that help better our world. I would really like to see us get away from our dependence on fossil fuels.

Santa Cruz, CA

Anthem, Arizona

Indianapolis, IN – 02/17/07 I am trying to make a miniature model, power generator, using a turbine in a cascade refrigeration system and am in need of components.

Chesterton, Indiana

Annapolis, Maryland

Bernardston, MA – ferrocement_DOT_com  Lived off grid from 1975-95. Don't have electricity at my shop now. Want formula for a constant focus point parabolic plane for development design project.