European Membership: 199Austria, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Czech Republic, Cyprus, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Macedonia, Malta, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, Scotland, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, U.K.
|
|
Alexandru Acs Brasov, Romania -- I'm opening to do something to produce low cost energy. But I think, this is a team work, for mankind benefit. I want to get involved in to reasonable project... |
| olagoke adewumi seadogz40_AT_yahoo_DOT_com coventry, west midlands, uk -- 06/11/07 |
|
Kimmo Ahola Sievi, Finland - I'm interested in using Tesla's development in reverse solution: blower. Any info about this is greatly appreciated. |
|
John Stafford Allen |
|
Victor Almansa Albacete, Spain – 02/24/07 |
|
Adolfo Altieri |
| Luis Ignacio Arce nacho_AT_enernatura_DOT_com Barcelona, Spain -- http://enernatura.com 06/01/07 |
|
Oguz Argun Berlin, Germany - ME., Tesla turbine, hydrogen, geothermie |
|
Cosku Arsiray carsiray_AT_elektrosonik_DOT_com.tr Ankara, Turkey |
|
Christian Daniel Assoun (Email not
working 08/2006) |
|
John Bartle Kingsley, England - Marine Technician/Engineer Developing mechanical and electronic systems for marine survey. Home interests include developing solar energy projects and electronics. |
Kenneth Basterfield |
|
Christophe BERRIT christopheberrit_AT_gmail_DOT_com Tullins, FRANCE - 04/02/07 |
|
Martin Best |
| Walker Bho walker_bho2004_AT_yahoo_DOT_it Palermo, Sicilia, Italy -- 01/29/08 I am a technical manufacturer mechanical enthusiastic about the inventions of Nikola Tesla. |
|
Ogan Bicer |
|
Alan Blaikie a.blaikie_AT_btinternet_DOT_com Earlston, Scotland - Model Maker, experiments with Tesla Turbine's |
|
Catalin
Braica |
|
Allain Bernard Paris, France |
| Bruno Bouteille b.bouteille_AT_sirea-snb_DOT_com CASTRES - FRANCE -- 11/17/07 http://www.sirea-snb.com I work in the fields of electrical energy and I'm very interested by the possibility to develop power system on the basis of steam turbines. |
| Dr. Eugen Brenner brenner_AT_tugraz_DOT_at Graz, Austria -- 12/16/07 Assoc. Prof., Institute for Technical Informatics, Graz University of Technology. I am very interested in Tesla’s work – as you might know he was educated in our institution. |
|
Daniël Bullaert Herentals, Antwerp/ Belgium -- I'm a very old man VERY interested in all kinds of alternative energy |
|
Chris Bureau Cosne, France |
Daniel Burke |
Buzea Lucian |
|
Umit Caglar (Email not working 08/2006) Ankara, Turkey -- Electrical Engineer (MS) |
|
MATTIA CAMPOSTRINI mattiacampostrini_AT_tiscali.it Bardolino, Verona, Italy -- www.energard.it Energy consultant |
|
Frank Celby (Email not working 08/2006) Ankara, Turkey -- Tesla Fan |
|
Cioc Teodor |
|
David Clement Surrey, UK -- 11/25/07 Occupation: surveyor (building). I am currently refitting my 30sq metre home work shop in preparation for constructing a Domestic Solar / Hydrogen Power Generation System. |
|
Richard Coleby (Email
not working 08/2006) |
|
Anne T Coleman |
|
Thomas Wilhelm Commondt (Email not working 08/2006) Parainen, Finland – www.steamcastle.com I construct a steam power plant heated by wood. A small version intended for villa use. 3 to 9 kW max effect. I burn the wood in a high temperature ceramic wood burner making wood gas. By this burner and its high temperature burning, more than 1000 degrees centigrade, I burn the coal in the wood. That gives me a high efficiency. Best regards from Mr. Thomas Commondt |
|
steve cory Cambridge, Cambridgeshire, England -- 11/20/06 |
|
Mick Cunningham mickdc999_AT_btinternet_DOT_com Bolton, Lancs, England |
|
Thomas Dam |
|
Zoltan Damian teslamacska_AT_hotmail_DOT_com Budapest, Pest, Hungary |
Richard
Davies |
KEVIN DAY |
|
Luca Dolermo |
|
Andy Dunn dunner_AT_homebs22.fsnet.co.uk Weston-super-mare, Somerset, United Kingdom |
|
Stig Elvestad |
|
Gabor Erdodi |
|
Willi Euler willi.euler_AT_iqsolutions-gmbh_DOT_com Heerlen, Netherlands -- We are suppliers and operators of electrical power generators and require technology to generate electricity from the engine-heat water generated on the units. Is the waste-heat turbine project completed and in production yet? We are interested to produce this unit in Germany, for the European market. Please advise whether a license can be obtained. Thank you. |
Emile Fakhoury |
Suhail Farooqui |
|
Arjan Feskens Weesp, Noord Holland, the Netherlands |
|
Peter
Finke |
|
James Fitzsimons Lugano, Switzerland |
Arctic Fox |
Gordon
Furness |
|
Paolo Galletti Vistrorio, Torino, Italy |
Lisardo Garcia Bongera |
| Roger Gaskill roger_DOT_gaskill_AT_tiscali_DOT_co_DOT_uk Cirencester, Gloucestershire, England -- 06/03/07 Interested in Wind and solar power for generation |
|
Klaudio Gasparini Visnjan, Istria, Croatia |
|
Michael Gilbert Bradford, BD9 4DD, UK -- Very exciting. No engineering knowledge but want to keep informed of alternative energy sources/production |
|
Pedro Gimenez Peon Santa Pola, Spain -- I like renewable energy, special solar , but PV is very expensive, we need cheaper ideas |
| Xavier Girard xagir_AT_mac_DOT_com Gassin, Var, France -- 03/08/07 Involved in developing new technologies, autonomy in drinkable water and energy powering. Aim at providing off grid technologies to remote places in Africa. Key words: Hydrogen-Oxygen, water purification, energy production, aeronautics |
|
Paolo Greco Arese, MI, Italy |
|
Hubert Gögele |
|
Bob Golding Penzance, Cornwall, U.K. – Tesla is one of my heroes together with Frank Whittle and that bloke from the GPO who made the first computer, then was sent back to work with no credit for his work. Can’t remember his name. I have built several Tesla coils and work for a company using them for special effects in the film and TV industry. would love to build a Tesla turbine running off solar steam or propane. |
George
Grant |
|
Ross Guerin rossguerin1_AT_hotmail_DOT_com London, Surrey, UK -- I am studying a Higher National Diploma in Motor Sport Engineering, at Brooklands College, in the UK. I am designing and building my own version of the Tesla Disc Turbine for my second year project. I would be very grateful if you could contact me with any information which could better me in my research into Dr Nikola Tesla. I would also be grateful if would could pass on any information to me about anyone else, who has designed and built a Tesla Turbine. Thank you very much, Ross Guerin |
|
Danijel Habek Rijeka, Croatia -- www.rijekaonline.com Trying to build alternative energy cogen into a family-run hotel. |
|
Hannu Hakli |
| Alexander Haratzas zeidoros04_AT_yahoo_DOT_com Kythera – Greece -- 12/26/07 www.zeidoros.gr |
|
Jim Hart Ayr, Ayrshire, Scotland |
|
Alan Hayes Carrick-on-Shannon, Roscommon, Ireland -- 12/18/06 Interested in finding out if TESLA can help me with my own projects!! |
Bas
Hermans |
|
Robert Heuckelbach |
|
Ben Hill |
|
Steve Holden steveholden_AT_btinternet_DOT_com London, United Kingdom |
|
Karl Gustav Horgby Tranas, Sweden -- www.ho.tranas.se |
| Alan Huggett sales_AT_tradeframe_DOT_net or alan.huggett_AT_googlemail_DOT_com Portsmouth, UK -- 01/30/08 www.tradeframe.net |
|
Frank Huxley Wirral, England, Great Britain - www.turboclinic.co.uk turbocharger overhauler & operating mobile steam loco building locos steam turbo generators 6volt now going to tesla them |
|
OB Instefjord Bergen, Norway |
Dzik Jaroslav |
|
Marek Jaroslawski Olawa, Poland |
|
Anders Johansson Norråker, Ångermanland, Sweden - Hi! I am a 23 year old guy from Sweden who is interested in turbines and pulsejets. I have recently built a turbine powered go-cart and some other stuff and have started to read about the tesla turbine. When I have finished some other projects it would be fun to build a tesla, but until then I catch up on the theory... |
|
Peter
A. Jonkers |
|
Goebel
Jurgen |
Bal Karadia |
|
Juha Katajisto juha.katajisto_AT_insolution.fi Tampere, Finland -- Control engineer, specialized in embedded systems and numerical data analysis techniques. Working in industry automation area, focused on renewable and distributed energy production networks. Very interested and passionate hobbyist of control and alternative energy systems. |
T. Bayram Kaya |
|
Mansoor Khan |
Timothy Kondos |
|
Knut Kongsrud Hagan, Norway |
|
Wout Kooren |
Jürgen
Kramhöller |
|
Peter Kropik |
Vladimir Krstic |
|
Lorenz Kuenzle Altendorf, SZ, Switzerland – Studied many theoretics about the tesla turbine, new into practical work on the engine. Try to build an engine running on diesel / jet-fuel to drive a electrical generator. |
Ian
Lee |
|
Richard Lines HUNTLY, Aberdeenshire, UK -- www.courtiestown.co.uk I live in rural Aberdeenshire and am actively looking at alternate energy options from wind turbines, hydro to more 'esoteric' Tesla derived 'air receivers'. I'm a seafarer by trade with a wife and two kids. I've some electronics ability and restore old Land-Rovers. I'm keen to determine if one of these devices might be able to help me out. |
|
Piotr Lis Lodz, Poland -- 11/16/06 |
|
Domagoj Lisicak Croatia -- Coming from country where Tesla was born, I was interested in his work since my childhood. Today at age 34 (and being B.Sc.EE) I would like to do something more practical than just reading books. I'm interested in non-pollution and non-nuclear way of producing/transfer of energy. |
Christophe
Lopez |
|
Wesley Lorrez wesley_lorrez_AT_hotmail_DOT_com Belgium – If only we all could be Earthlings ... |
|
Antonio
Loureiro |
|
Jose Luis Quarteira, Algarve, Portugal -- I'm 39 years old, I'm a Blacksmith on my way to finish a bachelor's degree in electronics. I've always been interested in alternatives energies, solar and hydrogen. I'm hoping to start doing some experiments in my workshop. |
|
Luksic Luka Novo mesto, Dolenjska, Slovenia -- llcustom.tripod.com/anim8 Mechanical experiments are my hobby. |
|
John Mack Solihull, West Midlands, UK -- Retired engineering designer, model maker, interested in comparing a small TT with another simple rotor for compressed air flight. Glad to have found such a practical site. |
|
Harish Makaram harish.makaram_AT_gmail_DOT_com Karlsruhe, BW, Germany -- 12/04/06 |
| Chris Makoundoul Email unlisted Danderyd, Stockholm, Sweden -- 12/21/07 |
|
Charles Manley United Kingdom -- http://tmtech.co.uk Design engineer with small company engaged in general engineering design and development of production machinery. Facilities include 3d cad system, Wire EDM, plunge edm, 4axis cnc milling, cnc turning, grinding, welding tig- mig- mma, heat treatment etc. Discovered Telsa turbine recently -- Interesting! |
Jacques
Marachlian |
|
Jerry Martin jerryandval_AT_hotmail_DOT_co_DOT_uk East Sussex, England -- 06/29/07 I'm an alternative energy follower. I'm about to buy a stable in France and want to incorporate every type of alternative technology that I can into the building. I have comprehensive plans for earth toilets, underground rainwater storage, geothermal heating and hot water systems, wood and waste oil furnaces auxiliary systems, but the one thing eluding me is an electrical generating system. Although I am not an engineer, I have a friend who runs a small backyard engineering business who would be able to do any machining work. My field of expertise is in construction. |
|
James Mason mason_james_AT_btinternet_DOT_com Walsall, West Midlands, United Kingdom -- I am a trainee Electronics Design Engineer, I spent 10 Years as a Electrical Design Engineer until an Accident at work forced me to re-train, I am currently building a type of Solar Tracker, it's goal is not only solar tracking but of positional control for a telescope, both use X-Y axis I am currently using the Solar side of things for programme testing and to hopefully power the system once fully constructed! |
|
Ronan McDonagh |
|
Luis Mendonca Portugal -- Has been developing rocket & gas turbine engines for several years. (Check out his Pulse Combustion Project on our PTBC!) |
Arjan Meskers |
|
Antonio Miclavez |
Srdjan Mihaljevic |
|
Ivan Milijic Beograd, SRBIJA, SCG |
|
Peter Mills Sandygate, Isle of Man, United Kingdom -- Grew up in Rhodesia, lived in Zambia and South Africa. Built my own house in each country. Absolutely fascinated with alternative energy especially using scrap machinery, have already built vertical axis windmill out of car back axle and plastic oil drum, but have yet to fit car alternators. Thinking of ideas to build wind generated air compressor to run tools and Tesla turbine, but I am a bit thick...... airfield near our home was analyzed as best site in Britain for wind generation. The wind is whistling round the house as I type. Your site is great, I'm fascinated. |
|
Lacombe
Milo |
Vasco Moises
Almeida |
|
Peter
Monson |
|
Christopher Murphy Leighlinbridge, co carlow, Ireland -- http://precisionengineersireland.com I am aged 55 years, married with 2 daughters, have a well equipped machine shop CNC Lathes, Cnc Mills, gear hobbers & shapers, surface & cylindrical grinders 42" dia, cylindrical grinders, keyseaters, slotters, etc. |
Manly Nash |
| Zdenek Nenutil nenutilAT_tiscali_DOT_cz Kromeriz, Czech Republic -- 11/4/07 |
|
Allan Juul Nielsen Aarhus C, Denmark -- 12/28/06 thanks for this fine page Allan DK |
|
Gorm Groot Nielsen Vedbæk, Denmark -- www.gni.dk 11/21/06 |
| Andreas Nilsen impuls60_AT_hotmail_DOT_com Larvik Vestfold, Norway -- 03/09/07 I'm studying to become a product engineer atm, and I am hoping to produce a l.p. Tesla turbo for my car eventually.. |
|
Thomas
Newby |
Lennart
Nilsson |
|
Roger Nilsson Gothenburg, Sweden -- Columbi Egg is one of the Good Way Looking for the other Thousands |
|
Jarin Novak Czech Republic |
|
Kristian
Oesterbaek |
|
Miroslav Oliva Tomaszow, Poland |
|
Tobias Öman Luleå, NB, Sweden |
|
Jerry Ostrow Gjovik, Oppland, Norway |
|
Onyeolu Oweerri LONDON, UK |
Gianluigi
Paganotti |
|
Eerikka Paita Helsinki, Finland |
|
Rudi Panjtar Škofja Loka, Gorenjska, Slovenia -- 04/29/07 I am interested in research, development and practical use of alternative energy concepts, which use nature resources (water, solar, wind, biomass). |
|
Tomislav
Pavlovic |
|
Tim
Payne |
|
Sam Peck Durham, England -- www.dur.ac.uk/s.j.peck I'm an Engineering Student at the University of Durham, and I am considering developing the Tesla Turbine for a final year project and possibly a PhD. |
Anthony
Peskett |
|
Joe Peel |
|
Vlastimir Pejic Doboj, Republika Srpska, Bosnia and Herzegovina -- I am engineer |
|
Mauro, Pelatti Florence, Italy -- I have a small metal working manufacturing business. I am interested in turbine |
Lars Persson |
|
Peter Pfister 8320 Fehraltorf, Switzerland |
|
Thomas John Phillips Conwy, County Conwy, North Wales U.K. -- Retired Hospital Engineer Interested in solar generators (Not PV'S) |
|
Ranko Pilic Tonbridge, Kent, UK -- Shrieve |
|
Morgan
Platt |
|
Reidar Henrik Plesner N-1366 Lysaker, Norway -- Mechanical engineer. Working on organic gasifier, using energy crops, wood residue, household waste etc. High energy "city gas" g |
Use Edit/Find on your browser to search for keywords on this
page.