Toronto, Ontario, Canada -- 01/11/07

Frank Belzile 
frankbel_AT_shaw_DOT_ca 
Edmonton, Alberta Canada – 02/19/06 Interested in converting old c band satellite dishes into solar steam generators. Purchased a combo lathe milling machine from House of Tools and am ready to experiment in the construction of "bladeless turbine" closed loop system in which steam exiting is condensed to create a vacuum, to further enhance the power output of the turbine to run a brushless permanent magnet 3phase generator

Hillsborough, New Brunswick, Canada e4h-2z2 -- Interested in developing alternate technology for third world countries

Okotoks, Alberta, Canada – I am a renewable resources engineer specializing in low temperature power generation and high efficiency house design. I have an Engineering Physics degree and an industrial background in controls.

  *Emails should contain the word stueysplace in the subject to get through the spam filter

Guelph, Ontario, Canada – A soon-to-be first year mechanical engineering student at University of Waterloo. My motivation for choosing this particular academic avenue is to provide me the opportunity to be in a position to actuate real change. My focus is on the integration of existing technologies and the creation of interdependent systems for use in structural applications. I want to revolutionize the way people build. I plan on creating buildings that have all of their component systems integrated to form complete, efficient, start-to-finish networks. Mass-produced self-sufficient 1/4-acre suburban homes that you get off the back of a truck. Townhouse complexes where eves-trough and street run-off are used in gray-water systems. Converted industrial spaces used as builders co-operatives with independents working in highly specialized environments, yet under the protective umbrella of a completely generalized collective whole. Idealistic, I know, but I'm young and I've lots of time to become cynical. Might as well use my ambition to obtain an unattainable dream rather than just reaching out for that last, pre-packaged, re-fried bean burrito.

Port Williams, Nova Scotia, Canada – I am interested in alternate energy technologies and hope to start a company selling environmental products. I am always interested in finding new suppliers so if you have something you think I might be interested in drop me an email.

Burnaby, BC, Canada – A beginner of such, but a fan none the less

Canada -- love to learn

Napanee, Ontario, Canada -- Curious hobby machinist

Montreal, Quebec, Canada -- I am very interested in Tesla turbine concept. I would like to build a prototype.

Sudbury, Ontario, Canada

Dresden, Ontario, Canada

Les Hauteurs , Quebec, Canada -- ethanolpro.tripod.com 11/08/06 Retired control and robotics engineer, setting up our home as an energy self sufficient test station. We have purchased a minifarm ( 85,000 SF ) Will be experimenting with solar heat, solar steam , ethanol production etc.

Bourget, Ontario, Canada -- www.woodnstuff.ca  I live in on 88 acres in a rural area just 20 miles from Ottawa. I retired early and have enough time to play around at woodworking and other things that stir my imagination

Thunder Bay, Ontario, Canada -- 11/13/06 A hopeless tinker

North Vancouver, BC, Canada

Meadow Creek, BC, Canada – 02/27/07 Retired Prof.. Thought "Energy Systems Technology" Long time ago.

New Minas, Nova Scotia, Canada

Cloyne, Ontario, Canada

Gatineau, Quebec, Canada -- 11/07/06 Jack of all trades, master of a lot of them

Windsor, Ontario, Canada - www.internetfred.com  projects in solar, wind and alternative energy

Brossard, Quebec, Canada -- Buckminster Fuller was my mentor. I have over 30 years of experience in renewable energies. My passion is Green Buildings which export energy to local grids at peak demand. Was a delegate\observer at the U.N. Climate Change conference in Montreal 2005....

Toronto, Ontario, Canada -- I am a big fan of all of Tesla's ideas. Also very interested in products that do not use as much of Earth's precious resources. Currently working on a house made of Rammed Earth in Tamworth, Ontario. Using designs of Frank Lloyd Wright, another of my heroes.

Hamilton, Ontario, Canada -- Just an old tinkerer.

Lions Bay, BC, Canada -- 01/31/07

Toronto, Ontario, Canada -- I have talked with you a lot over the years by phone..........

Pembroke, ON, Canada -- http://www.dealersneeded.com/enviro/  I am a Professional Engineer and member of the Ontario Professional Engineers Association. Graduate Queens University with B.Sc.(62) In Electrical Engineering. Graduated Ottawa University with M. Eng.(78) In Mechanical Engineering. Worked for 3.5 years at Canadian National Telecommunications as a Communication Engineer. Worked at Atomic Energy of Canada for 31.5 years. Reactor Operations Engineer NRX and NRU Reactors. Worked On the Super Conducting Cyclotron. Commissioning Manager in charge of upgrading NRX REACTOR Shutdown System. System Engineer in charge of Reactor Control Systems.

Francis, Saskatchewan, Canada

Toronto, Ontario -- I worked as a mechanical designer

Richmond Hill, Ontario, Canada -- Hello There, I'm a newbie, interested in experimenting with the combination solar collector-Tesla turbine for the purposes of generating electricity. Is there a set of plans for the current design by Sean Capogreco's system? Thank you very much, Victor Manea

Pincourt, Quebec, Canada – Interested in building a system to provide 100% of energy for a single family home, electric and heat.

Sherwood Park, Alberta, Canada

Red Deer, Alberta, Canada -- I am an Electrical Engineer, and a programming hobbyist. I am interested in all of Tesla's ideas and hope to reproduce for experiment all of his inventions some day.

Edmonton, Alberta -- HI. I am a machinist living in Edmonton \AB Canada I have long been interested in gas turbines I am currently looking for basic plans for building a small tesla type turbine. of special interest to me would be any information on combustion chambers. thank you

Regina, SK, Canada

Brossard, Quebec, Canada

Medicine Hat, Alberta, Canada -- ham radio

Ile Bizard, Quebec, Canada – www.pondeneterpises_DOT_com Seriously looking for a power turbine for energy generation.

Victoria, British Columbia, Canada -- www.teko.com  interested in developing a Wells turbine (bi-directional fan) for harvesting solar/heat-driven, low-speed convection currents in an enclosed, insulated environment. assistance welcome! functioning prototype will be built in a very sunny environment, possibly the Caribbean

Oshawa, Ontario, Canada -- Moved to the country with my wife and two young boys 3 years ago. We have an R2000 home built on 5 acres and am upgrading all of the systems in the house to be as efficient as possible. Our main heat source is a heat pump supplemented by thermal piping from our new 135ft. well. I built a 5000 watt 16 hp generator and installed a generator panel on my service. We have used it 8 times in the last 1.5 years more that 2 hours and as much as 22 hours. We are seeing a trend in the instability of our power supply, and I have started researching solar generation for the past week. I am a novice inventor but want very much to build a generator with my neighbour to try and become more self sufficient. I am very excited to have found your web sight as I will be attempting to become an active member of your club. And hopefully a successful solar generator....lol I look forward to your updates, and look forward to the time I may contribute my experience.

atinnovations_AT_shaw_DOT_ca 
Ladysmith B.C. Canada -- 03/12/07 Interested in the Tesla turbine.

Vancouver, BC, Canada -- Professional Engineer interested in energy self-sufficiency. Totally agree on your take of the current unsustainable situation.

Powell River, BC, Canada