Phoenix Turbine Builders Club

Previous Back Next

First Detailed View of the Global Cogenerator Turbine

February 11, 2003

Experimenter's Tesla TurbineWe'll start this month with a brief review of our January article. In it we discussed the more rational approach to solving our economic and energy problems through widespread use of little-known technologies such as the Tesla turbine -- rather than the short-sighted approach of stealing oil. 

We also pointed out that with the growing unemployment problems around the world (due to greed economics), there is a new opportunity to create a large number of small entrepreneurial businesses based on boundary layer turbines & their applications.

Finally, we outlined our plan to initiate this global revolution to 21st century turbine power by introducing a turbine kit followed by all of the necessary components to assemble a complete, high quality cogeneration system.

On that note we'll move on to examine details of our new turbine design. Since a picture is worth a thousand words, we will simply show various parts details along with a brief description of the view.

hot rotor with end cover removed View of turbine with hot rotor end cover removed
Turbine with hot rotor case removed, showing disk pack disk pack, hot rotor case removed
disk pack, outer disk removed Disk pack with outer disk removed
View with all disks removed showing star washers & round washers star washers & round washers
star washer set Close up of star washer set
Cut-away view of hot rotor flange fit to tapered shaft end hot rotor flange
shaft assembly Cut-away view of case revealing shaft assembly
Close up view showing internal oil pump & oil jets for bearing lubrication internal oil pump & oil jets
oil jet & bearing relationship Close up view of oil jet and bearing relationship
View of oil lubrication system including oil reservoir oil lubrication system
oil jet & bearing Close up of oil jet and bearing
Jet oil system with shaft removed jet oil system
closeup oil jet & bearing Another close up view of the oil jet & bearing relationship

Conclusion

Before we go I'd like to remind all of our club members that we all need to work together to successfully move the world from old, ailing technologies to the real 21st century engine. While many misguided people seem to think that fool cells will someday result in economically feasible power for electrical & transportation needs, nobody on the planet can predict exactly when this will happen. Tesla turbines are historically proven to work, and with some technical improvements will far surpass pistons and fuel cells.

Making this revolution happen requires the collective genius of many members to not only work out the technical details, but also to manufacture, promote and support this new industry growth. We really can solve the world's major problems of hunger, disease and slave labor, but only by defeating monopolistic greed worldwide. 

For those of you who are serious about effecting global change, either build a turbine or buy one of our kits, and start experimenting. At the very least you will end up with a personal cogenerator system, contributing at least a small part in this necessary move. 

For those of you seeking new business opportunities, check out our latest PNGinc offerings for manufacturing franschises or the Sustainable Growth Alliance for alternative vehicle developers.

Ken Rieli

Coming next -- detailed parts drawings

 

^ Top of Page

Next Page >

Last updated: 07/02/08 11:21 PM

Phoenix Turbine Builders Club

FREE Open Source Forum

http://phoenixnavigation.com/ptbc/home.htm